
Mumbai
In CAP 2026, the last General Open state-level seat in Chemical Engineering at ICT Mumbai went at merit rank 2321, an MHT-CET percentile of 99.46, in Round IV. The toughest B.Tech entry was Food Engineering and Technology and Pharmaceutical Chemistry and Technology, which closed at 895 and 998. The easiest was Fibres and Textile Processing Technology at 8567. Every figure is a CAP merit rank published by the Maharashtra CET Cell.
ICT Mumbai publishes no cutoff of its own for UG. Its B.Chem.Engg, B.Tech and B.Pharm seats are filled through the CET Cell's CAP rounds, and the CET Cell publishes the cutoff list after each round. State-level seats use the MHT-CET percentile. All India seats use the JEE Main percentile. Each list shows the merit rank, with the percentile in brackets, of the last candidate allotted a seat (source: Maharashtra CET Cell CAP 2026 cutoff lists).
Merit rank, percentile and round are three different things
A state-level merit rank comes from the MHT-CET list. An All India merit number comes from the JEE Main list. They are not comparable. A rank in the Round I list is also lower than the same branch's rank in a later round, so always check the last round.
Check the merit rank for your branch, your category and your seat level, in the last CAP round. A General category student from Maharashtra looks at the state-level General Open column, written GOPENS. A girl also checks the Ladies Open column, LOPENS. A student with a JEE Main score looks at the All India list.
ICT's AICTE disclosure lists the admission percentile for 2023-24. It does not define whether the figure is the first or the last admitted candidate, so the two columns below are a guide, not a like-for-like trend.
| Branch | CAP 2026 state General Open, closing percentile | ICT disclosure 2023-24, open percentile |
|---|---|---|
| Chemical Engineering | 99.46 | 99.95 |
| Pharmaceutical Chemistry and Technology | 99.79 | 98.94 |
| Food Engineering and Technology | 99.81 | 98.34 |
| Polymer Engineering and Technology | 99.32 | 98.50 |
| Fibres and Textile Processing Technology | 98.01 | 95.15 |
No. For UG, the Maharashtra CET Cell publishes the CAP cutoff lists. For PG, ICT publishes merit lists and no fixed GATE or test cutoff.
GOPENS is the General Open state-level list, open to all candidates. LOPENS is the Ladies Open list for girls. A girl can be considered in both.
The table gives the closing merit rank for General Open seats, with the MHT-CET or JEE Main percentile in brackets. The closing rank is the largest rank allotted in any CAP round, which is Round III or IV for most branches.
| Branch | MHT-CET state General Open, CAP 2026 | JEE Main All India, CAP 2026 |
|---|---|---|
| Chemical Engineering | 2321 (99.46), Round IV | 2284 (97.48), Round IV |
| Pharmaceutical Chemistry and Technology | 998 (99.79), Round IV | 3116 (96.79), Round IV |
| Food Engineering and Technology | 895 (99.81), Round II | 3421 (96.54), Round I |
| Polymer Engineering and Technology | 2960 (99.32), Round IV | 3064 (96.82), Round I |
| Surface Coating Technology | 5171 (98.81), Round III | 3640 (96.35), Round II |
| Oils, Oleochemicals and Surfactants Technology | 5633 (98.70), Round III | 4321 (95.77), Round III |
| Dyestuff Technology | 6890 (98.42), Round III | 5294 (95.07), Round IV |
| Fibres and Textile Processing Technology | 8567 (98.01), Round III | 5724 (94.72), Round IV |
For B.Pharm, the last General Open state-level seat in Round I went at merit rank 19 (99.94 percentile). In Round II it went at 26 (99.92). B.Pharm has no All India seats at ICT, so JEE Main is not used. The CET Cell lists for later pharmacy rounds were not found.
For CAP 2026 General Open state seats, the closing merit rank ran from 895 (Food Engineering) to 8567 (Fibres and Textile Processing). Chemical Engineering closed at 2321 in Round IV.
No. Pharmaceutical Chemistry and Food Engineering close at much lower ranks than Dyestuff or Fibres and Textile Processing, so check the branch you want, not the college as a whole.
This table shows how the state-level General Open rank loosened from Round I to the last round with an allotment.
| Branch | Round I merit rank (percentile) | Last round merit rank (percentile) |
|---|---|---|
| Pharmaceutical Chemistry and Technology | 485 (99.90) | 998 (99.79), Round IV |
| Food Engineering and Technology | 579 (99.88) | 895 (99.81), Round II |
| Chemical Engineering | 1579 (99.63) | 2321 (99.46), Round IV |
| Polymer Engineering and Technology | 2269 (99.47) | 2960 (99.32), Round IV |
| Surface Coating Technology | 4345 (99.00) | 5171 (98.81), Round III |
| Oils, Oleochemicals and Surfactants Technology | 4829 (98.89) | 5633 (98.70), Round III |
| Dyestuff Technology | 5809 (98.66) | 6890 (98.42), Round III |
| Fibres and Textile Processing Technology | 7505 (98.26) | 8567 (98.01), Round III |
Pharmaceutical Chemistry and Technology and Food Engineering and Technology. Their state General Open lists ended at 998 and 895. For All India seats, Chemical Engineering was the hardest at 2284, then Pharmaceutical Chemistry and Technology at 3116.
Chemical Engineering state seats moved from 1579 in Round I to 2321 in Round IV, a gap of 742 ranks. Pharmaceutical Chemistry and Technology moved from 485 to 998. All India Chemical Engineering moved from 1831 to 2284. Reading only Round I will make you write off branches you could still get.
Fibres and Textile Processing Technology. It closed at 8567 for state General Open seats and 5724 for All India seats. Dyestuff Technology was next at 6890 and 5294.
State level, General Open: merit rank 2321, 99.46 percentile, in CAP 2026 Round IV. All India: JEE Main merit number 2284, 97.48 percentile.
State level, General Open: merit rank 998, 99.79 percentile, in Round IV. All India: merit number 3116, 96.79 percentile, in Round IV.
Reserved-category figures are ranks within the state-level list of that category. The table shows Chemical Engineering, the largest branch, in CAP Round I.
| Category (state level) | Merit rank | MHT-CET percentile |
|---|---|---|
| General Open (GOPENS) | 1579 | 99.63 |
| Ladies Open (LOPENS) | 2027 | 99.53 |
| TFWS | 2206 | 99.49 |
| OBC (GOBCS) | 3793 | 99.13 |
| SEBC (GSEBCS) | 4353 | 99.00 |
| EWS | 5365 | 98.76 |
| SC (GSCS) | 14592 | 96.59 |
| ST (GSTS) | 48584 | 88.42 |
Mostly. Food Engineering and Technology stays the hardest branch for OBC and SC seats, and Fibres and Textile Processing Technology the easiest. Pharmaceutical Chemistry and Technology had no OBC allotment in the CAP lists, but its SC rank was 7170, well inside the other branches.
| Branch (CAP Round I) | OBC merit rank | SC merit rank |
|---|---|---|
| Food Engineering and Technology | 1468 | 3144 |
| Chemical Engineering | 3793 | 14592 |
| Polymer Engineering and Technology | 4251 | 15465 |
| Oils, Oleochemicals and Surfactants Technology | 5750 | Not listed |
| Surface Coating Technology | 7334 | 19102 |
| Dyestuff Technology | 9422 | 24637 |
| Fibres and Textile Processing Technology | 15673 | 28820 |
| Pharmaceutical Chemistry and Technology | Not listed | 7170 |
Round I Ladies Open ranks at the state level were 187 for Pharmaceutical Chemistry and Technology, 514 for Food Engineering and Technology, 2027 for Chemical Engineering and 2662 for Polymer. The loosest were Dyestuff at 6594 and Fibres and Textile at 6758. Pharmaceutical Chemistry and Technology had a lower Ladies Open rank (187) than its General Open rank (485), so a girl should check both columns.
In Chemical Engineering Round I, the SC state list closed at merit rank 14592 and ST at 48584. Food Engineering had the lowest SC rank, 3144.
TFWS in Chemical Engineering closed at 2206 in Round I, and at 100 for Pharmaceutical Chemistry and Technology. TFWS seats are about 5% of the intake and carry a tuition fee waiver.
This section is an expectation, not a published figure. The CET Cell has not opened its 2027 cycle, and the 2027 MHT-CET and JEE Main dates are not in the documents available. The only honest basis is the 2026 range from Round I to the last round.
| Branch | 2026 state General Open range, Round I to last | What could move it in 2027 |
|---|---|---|
| Pharmaceutical Chemistry and Technology | 485 to 998 | Small batch of 18 seats |
| Food Engineering and Technology | 579 to 895 | Small batch of 16 seats |
| Chemical Engineering | 1579 to 2321 | The largest batch, 75 seats |
| Fibres and Textile Processing Technology | 7505 to 8567 | Larger batch of 34 seats |
A cutoff is set by the last candidate who accepted a seat. That depends on seats, candidates and the other offers those candidates held, and none of these is known for 2027. Branches of 16 or 18 seats can move by hundreds of ranks on a few decisions.
Use the 2026 range as a planning line. If your rank is close to the 2026 round range for a branch, fill it, and keep filling in later rounds. If your rank is far outside it, fill a different branch. Any figure presented as a published ICT Mumbai 2027 cutoff is not from the CET Cell.
No one can say. ICT has not announced any change in seats for 2027. Check the CET Cell seat matrix when it is published.
Six things move an ICT Mumbai cutoff, and exam difficulty is only one of them.
1. The number of seats in the branch. The 2026 CAP matrix has 209 B.Chem.Engg and B.Tech seats at Matunga, spread unevenly. Chemical Engineering has 75 and Fibres and Textile 34. Five branches have 16 or 18 seats, so one candidate's decision can move the closing rank.
2. The state and All India split. Each branch splits into state-level and All India seats. Chemical Engineering has 52 state and 23 All India seats. After CAP IV, 8 state seats and 16 All India seats across the eight branches were still vacant, as per the CET Cell's provisional list of 8 September 2026.
3. The CAP round. Closing ranks loosened between Round I and the last round for every branch in 2026. A candidate who holds a better seat elsewhere frees a seat here in the next round.
4. The category and the seat pool. Open, OBC, SEBC, SC, ST, EWS, TFWS and Ladies each close on their own last admitted candidate. Maharashtra reservation applies to state seats, and ICT gives EWS 10% over and above the intake.
5. The exam and its percentile. State seats use MHT-CET percentile and All India seats use JEE Main percentile. The same percentile is not the same difficulty in the two exams.
6. B.Pharm demand. B.Pharm has 30 state seats and no All India seats. Its Round I General Open rank was 19, which puts it among the most competitive of ICT's UG seats.
You confirm the seat on the CET Cell portal and create a profile on the ICT Samarth portal. Then you report to ICT with original documents and pay the fee by demand draft. The B.Pharm notice for 2026-27 shows this sequence. The steps sit on the ICT Mumbai admission page.
Clearing a cutoff is not the same as being able to afford the seat. Check the ICT Mumbai fees page for the first-year bill before you confirm.
A few do. After CAP IV, 8 state seats and 16 All India seats across the eight B.Tech branches were vacant. ICT then runs an institute-level round for the seats left.
ICT has not published one in the documents available. The fee for that round is declared in a separate notice.
Answers to what readers ask most often.
In CAP 2026, the last General Open state-level seat went at merit rank 2321, 99.46 percentile, in Round IV. The All India seat closed at JEE Main merit number 2284, 97.48 percentile. Data Sources: Maharashtra CET Cell CAP 2026 cutoff lists.
Food Engineering and Technology and Pharmaceutical Chemistry and Technology, which closed at state merit ranks 895 and 998 for General Open seats. For B.Pharm, Round I closed at 19. Data Sources: Maharashtra CET Cell CAP 2026 cutoff lists.
Fibres and Textile Processing Technology, at state merit rank 8567 (98.01 percentile) and All India merit number 5724 for General Open seats. Data Sources: Maharashtra CET Cell CAP 2026 cutoff lists.
For General Open state seats in CAP 2026, the closing percentile was between 98.01 for Fibres and Textile and 99.81 for Food Engineering. Chemical Engineering closed at 99.46. Data Sources: Maharashtra CET Cell CAP 2026 cutoff lists.
Content authored by:
Updated on
Mumbai, Maharashtra
Taking an exam, selecting a college
Find insights & recommendations on colleges and exams that you won't find anywhere else
Sign Up & Get Started